The Bizopen Diamond Bur Tapered Fissure 847-018 Coarse Grit is the high-speed reduction instrument in Bizopen’s crown preparation bur sequence — designed as the first instrument used in the two-step crown preparation protocol where coarse-grit rapid reduction is followed by standard or fine grit surface refinement and margin definition. The 1.8 mm maximum diameter tapered body carries Bizopen’s 100 grit coarse diamond coating, enabling axial reduction rates that significantly exceed what standard grit preparation instruments can achieve on full-coverage crown preparations. In a typical full-crown preparation requiring 1.5 to 2.0 mm of buccal axial reduction, the 847-018 completes the bulk of this reduction in two to three axial strokes before the standard grit finishing instrument is used for final surface quality and margin definition. The coarse diamond particle layer is electroplated at greater depth than standard grit to account for the higher mechanical loads that coarse cutting under heavier pressure generates, maintaining particle retention integrity through equivalent clinical use cycles. The 6-degree taper angle maintains the standard draft geometry through the coarse and standard preparation steps, ensuring that the switch from bulk reduction to surface refinement does not alter the overall taper established in the initial preparation phase. FG shank. ISO 806 314 110 524 018. Maximum head diameter: 1.8 mm.
Bizopen Diamond Bur Tapered Fissure 847-018 Coarse Grit
15 $ Original price was: 15 $.12 $Current price is: 12 $.
Bizopen Diamond Bur Tapered Fissure 847-018, coarse 100 grit, 1.8 mm max diameter, 6-degree taper, FG shank for rapid bulk crown reduction and aggressive axial wall preparation before finishing.
Be the first to review “Bizopen Diamond Bur Tapered Fissure 847-018 Coarse Grit” Cancel reply
Related products
Bizopen Diamond Bur Flame Shape 863-010, standard 180 grit, 1.0 mm max body, 0.3 mm tip, FG shank for subgingival margin access, veneer cervical margin finishing, and interproximal crown preparation.
Bizopen Diamond Bur Tapered Round End 368-012, standard 180 grit, 1.2 mm max diameter, FG shank for combined axial wall reduction and deep chamfer margin preparation in a single-instrument crown preparation technique.
Uncategorized
Bizopen Diamond Bur Round 801-008 with fine 220 grit, 0.8 mm head, FG shank, for cavity finishing, enamel margin smoothing, and surface refinement in adhesive restorative and preparation procedures.
Bizopen Diamond Bur Crown Preparation Kit, 6-piece complete set with coarse, standard, and fine grit instruments for the full crown preparation sequence from bulk reduction through chamfer margin finishing.
Bizopen Diamond Bur Contra Angle Round 801-010, standard 180 grit, 1.0 mm head, RA latch-type shank for slow-speed contra angle handpieces, suitable for pediatric dentistry, endodontic access, and intraoral adjustment.
Bizopen Diamond Bur Flat End Cylinder 836-020, coarse 100 grit, 2.0 mm large diameter, FG shank for efficient bulk axial reduction on large posterior teeth and wide shoulder preparation in full-arch crown procedures.
Uncategorized
Bizopen Diamond Bur Chamfer 862-016, fine 220 grit, 1.6 mm diameter, FG shank for precise chamfer margin definition and smooth finish line preparation as the final step in crown preparation sequences.
Uncategorized
Bizopen Diamond Bur Round 801-012 with coarse 100 grit, 1.2 mm head, FG shank, designed for fast bulk enamel removal, crown preparation, and rapid material reduction in restorative procedures.




Reviews
There are no reviews yet.